AKIFUSA KNIVES
Akifusa Tadafusa Nashiji 270mm Wa-Slicer/Sujihiki
Brand: Akifusa Tadafusa Nashiji 270mm Wa-Slicer/Sujihiki
Blade Steel: Aogami/Blue #2 Steel Core, Stainless Clad, Nashiji Finish (HRC 62~63)
Handle: Octagonal Kebony Maple Wood Handle with Pakka Wood FerruleÂ
Blade Length: Approx. 270mm (Heel to Tip)
Total Length: Approx. 425 mm
Blade Height at Heel: Approx. 35.5mm
Spine Thickness at Heel: Approx. 5.0mm
Total Weight: 154.2g
Ohishi Tadafusa Kurouchi Tsuchime Aogami Series
Ohishi Tadafusa Kurouchi Tsuchime Aogami Gyuto 210mm
Ohishi Tadafusa Tsuchime Aogami Gyuto 210mm
Blade Steel: Aogami #2 Blade Core, HRC62~63, Stainless Clad Tsuchime Finish
Handle: D-Shaped Walnut Handle
Blade Length: 214mm (Heel to Tip)
Total Length: 366mm
Blade Height at Heel: 49mm
Spine Thickness at Heel: 4.10mm
Total Weight: 180.7g
Ohishi Tadafusa Kurouchi Tsuchime Aogami Petty 135mm
Ohishi Tadafusa Tsuchime Aogami Petty 135mm
Blade Steel: Aogami #2 Blade Core, HRC62~63, Stainless Clad Tsuchime Finish
Handle: D-Shaped Walnut Handle
Blade Length: 138mm (Heel to Tip)
Total Length: 267mm
Blade Height at Heel: 31mm
Spine Thickness at Heel: 3.18mm
Total Weight: 82.9g
Ohishi Tadafusa Nashiji Aogami Gyuto 210mm
Ohishi Tadafusa Nashiji Aogami Gyuto 210mm
Blade Steel: Aogami #2 Blade Core, Stainless Clad Nashiji Finish
Handle: D-Shaped Walnut Handle
Blade Length: 210mm (Heel to Tip)
Total Length: 365mm
Blade Height at Heel: 50mm
Spine Thickness at Heel: 3.81mm
Total Weight: 182.7g
Ohishi Tadafusa Nashiji Aogami Petty 135mm
Ohishi Tadafusa Nashiji Aogami Petty 135mm
Blade Steel: Aogami #2 Blade Core, Stainless Clad Nashiji Finish
Handle: D-Shaped Walnut Handle
Blade Length: 137mm (Heel to Tip)
Total Length: 268mm
Blade Height at Heel: 33mm
Spine Thickness at Heel: 3.20mm
Total Weight: 87.8g
Akifusa Sakon Damascus SKD Series
Akifusa Ohishi Sakon Damascus SKD 165mm Nakiri
Akifusa Ohishi Sakon Damascus SKD 165mm Nakiri
Blade Steel: SKD Tool Steel Blade Core, HRC 63~64, 73-Layers Damascus Finish
Handle: Western Black Pakka Wood with Rivets
Blade Length: 165mm (Heel to Tip)
Total Length: 285mm
Blade Height at Heel: 51mm
Spine Thickness at Heel: 1.95mm
Total Weight: 194.2g
Akifusa Ohishi Sakon Damascus SKD 210mm Gyuto
Blade: SKD Tool Steel Blade Core Clad with 73-Layers Stainless Steel Damascus
Hardness: HRC 63-64
Handle: Pakka Wood
Akifusa Ohishi Sakon Damascus SKD 240mm Gyuto
Blade: SKD Tool Steel Blade Core Clad with 73-Layers Stainless Steel Damascus
Hardness: HRC 63-64
Handle: Pakka Wood
Akifusa Ohishi Sakon Damascus SKD 180mm Santoku
Blade: SKD Tool Steel Blade Core Clad with 73-Layers Stainless Steel Damascus
Hardness: HRC 63-64
Handle: Pakka Wood
Akifusa Ohishi Sakon Damascus SKD 240mm Sujihiki
Blade: SKD Tool Steel Blade Core Clad with 73-Layers Stainless Steel Damascus
Hardness: HRC 63-64
Handle: Pakka Wood
Akifusa Ohishi Sakon Damascus SKD 240mm Sujihiki
Blade: SKD Tool Steel Blade Core Clad with 73-Layers Stainless Steel Damascus
Hardness: HRC 63-64
Handle: Pakka Wood
Akifusa Ohishi Powder Metal Series
Powdered metallurgical (PM) laminated Migake blade, hardened to 64-65 Rc, double bevelled. A forge-welded bolster seals the blade from the handle. The triple riveted tang runs the full length of the pakka wood handle. Both blade and tang are tapered for better balance and reduced fatigue during long use. PM steel is created using a crucible technique and results in smaller grain structure and significantly longer edge holding. This series of knives come with a special polished section, therefrom results a nicer surface and a better cutting quality.
%20210mm%20Gyuto.jpg)
Akifusa Ohishi (PM) 210mm Gyuto
Blade: SRS-15 Powder Steel
Hardness: HRC 64-65
Handle: Pakka Wood
%20240mm%20Gyuto.jpg)
Akifusa Ohishi (PM) 240mm Gyuto
Blade: SRS-15 Powder Steel
Hardness: HRC 64-65
Handle: Pakka Wood
Akifusa Powder Metal Series
%20210mm%20Gyuto.jpg)
Akifusa (PM) 210mm Gyuto
Blade: SRS-15 Powder Steel
Hardness: HRC 64-65
Handle: Pakka Wood
%20240mm%20Gyuto.jpg)
Akifusa (PM) 240mm Gyuto
Blade: SRS-15 Powder Steel
Hardness: HRC 64-65
Handle: Pakka Wood
%20180mm%20Santoku.jpg)
Akifusa (PM) 180mm Santoku
Blade: SRS-15 Powder Steel
Hardness: HRC 64-65
Handle: Pakka Wood